Copyright © 2009 www.killer-decals.com.  All rights reserved.
Solution Graphics
Harley Davidson is a registered trade mark of Harley Davidson Motorcycles Inc. and is not affiliated with Killer-Decals in any way.
ADVERTISE HERE!
Attention:
All These
Decals Must
Be Clear
Coated!
Only  $49.99 set
This is a kit to stripe your saddle bags like Harley Davidson used on
their 2003 anniversary motorcycles. It is silver with the small Harley print
in the center and gold outlines.
Kit comes with four stripes, enough  to stripe both bags like the originals.
This stripe is not made by Harley Davidson and is made as a
reproduction for a stripe that is not available from the manufacturer.
Saddle Bag Set
We trade ad space! You can put your add here if we
can put our ad on your page....
Contact us for approval!
FLTR ROAD GLIDE
Tank Stripe Kit For Your Harley
Davidson..
You Get 2- 27" Stripes   "Stock Size"
Only  $49.99 pr
These tank stripes are cut straight for
installation reasons but will contour your
tank very easy.  We also have more
stripes to add a little custom touch to your
bike. See front fender and rear fender
stripes below.
CUSTOMIZING YOUR BIKE?  BIGGER TANKS?  CUSTOM BAGS?
CHECK OUT OUR CUSTOM SIZE PAGE!
REAR Fender Stripes
This is  5/8" pin stripe like Harley Davidson used on their REAR
fenders of the 2003 Fatboy anniversary motorcycles. It is silver with
the small Harley print in the center and gold outlines. Cut straight and
contoured by installer.
Comes in 4'
This stripe is not made by Harley Davidson and is made as a
reproduction for a stripe that is not available from the manufacturer.
4' Only $49.99 pr      
Repro-Anniversary Pin Stripe For
FAIRING WHERE STRIPE GOES ON UNDERSIDE
This is  5/8" pin stripe like Harley Davidson used on their FAIRING of
the 2003 anniversary ROAD GLIDE motorcycles. It is silver with the
small Harley print in the center and gold outlines.

This stripe is not made by Harley Davidson and is made as a
reproduction for a stripe that is not available from the manufacturer.
72" Only $49.99 each           
VISIT OUR SPONSORS BY CLICKING BANNER -
Only  $24.99 pr
This is a kit to stripe your side panels like Harley Davidson did on their
2003 anniversary motorcycles. It is silver with the small Harley print in
the center and gold outlines.
You will receive two of the side cover stripes which measures 5/8" x 17".
This stripe is not made by Harley Davidson and is made as a
reproduction for a stripe that is not available from the manufacturer.
Repro-Anniversery Side Panel Stripes
This is a front fender stripe like Harley Davidson used on their 2003 anniversary
Sportster motorcycles. It is silver with the small Harley print in the center and gold
outlines.
The pin stripe measures 1/2" wide like the original which is smaller than the pin
stripe offered above which is used on the big bikes and rear Sportster fender.
This stripe is not made by Harley Davidson and is made as a reproduction for a
stripe that is not available from the manufacturer.
Only  $49.99
Horse Shoe Shaped Front Fender Stripe
For Your Touring Bike w/o Bar and Shield Like Original
PART# TKS101
PART# SBK101
PART# PIN017
PART# FFS101
PART# PIN048
PART# PIN072
TO STAY WITHIN COPYRIGHT LAWS THESE STRIPES DO NOT SAY HARLEY DAVIDSON IN THE PRINT.  
THEY ARE A SILVER STRIPE WITH THE GOLD OUTLINES AND THE PRINTING IN THE STRIPE RESEMBLE THE WORDING LIKE THE ORIGINAL STRIPES. THE "H" AND THE "N" HAVE
BEEN SLIGHTLY CHANGED TO MAKE THE LETTERING READ A DIFFERENT WORD. NO WHERE ON THIS STRIPE DOES IT SAY "HARLEY" OR "DAVIDSON" BUT SINCE THE
PRINTING IS SO SMALL IT IS HARD TO SEE THAT IT DOES NOT READ PROPER. ONCE INSTALLED AND CLEAR COATED IT IS VERY HARD TO TELL IT IS NOT ORIGINAL. WE DO
NOT SELL THE STRIPES WITH THE BAR AND SHIELD ON THEM. THE FRONT FENDER FOR SPORTSTER AND FX MODELS AND THE FAIRING STRIPE WILL RESEMBLE THE
ORIGINALS BUT WILL NOT HAVE THE BAR AND SHIELD. THE SILVER WITH GOLD OUTLINES WILL CONTINUE AROUND THE FRONT.
This is the tapered stripe (1 1/2" by 1") stripe resembling the
stripe Harley Davidson used on their 2003 anniversary
motorcycles tanks. It is silver with the small  print in the center and
gold outlines and the 5 black stripes in the center.
It comes die cut straight
but can be applied in a curve like the original by the installer.
This stripe is not made by Harley Davidson and is made as a
similar replacment for a stripe that is not available from the
manufacturer.